Numatic Hurricane HFM1500G Series

Large resilient floors lose their even shine across halls, retail floors and concourses. One single disc machine that scrubs, polishes, buffs, burnishes and spray cleans by speed and pad choice removes the need to store a separate machine for each finish.

This Hurricane HFM1500G suits contract teams working vinyl, linoleum, tile, sealed wood and stone across schools, offices, retail and leisure sites. Select the speed, fit the matching pad or brush, and walk overlapping lanes with the cable behind the operator. Scrub at the lower speeds, polish and buff in the middle band, and burnish or spray clean at the top end, picking up slurry with a wet vacuum on scrubbing passes.

The single disc drive runs from a 1500W motor with four speeds at 150, 230, 300 and 450rpm, changed to suit the pad fitted. Drive passes through an oil filled planetary gearbox, and the handle adjusts to the operator’s height. It is a corded floor machine, so route planning around sockets and cable management is part of every pass.

Store it with the handle folded or parked upright, pads removed and the deck wiped down so dried polish never bonds to the housing. Keep pads for each speed band so the machine never waits on consumables. Check cable, plug and handle locks each shift and log hours per site.

Key points

• 1500W drive motor with 150, 230, 300 or 450rpm speeds
• One machine covers scrubbing, polishing, buffing and spray cleaning
• Oil filled planetary gearbox with adjustable handle