Numatic CRL8072

Frequent refilling stops waste valuable machine time on extensive commercial sites. The CRL8072 ride-on scrubber combines an 80L capacity with a wide 720mm twin-brush deck, scrubbing large areas in fewer passes while cutting down trips to the drainage point.

The CRL8072 suits factories, logistics units and campuses scrubbing large industrial areas without a trailing cable. Drive measured lanes with the foam reduction system keeping recovery settled, fill through the extendable hose at standpipes or sluice points, and work outward from the fill station to minimise travel. Rated output reaches up to 3,670 square metres per tank fill at 5km per hour, which lets planners turn floor drawings into timed routes. The extendable fill hose is the small feature that saves real minutes at every refill.

Two 80L tanks separate clean and dirty water on one ride on chassis, so solution stays clean to the last lane. The foam reduction system protects vacuum performance when detergents foam under agitation. The rated coverage figure ties tank volume to travel speed, giving supervisors a planning number rather than a guess.

Rinse both tanks and the hose after every shift, check the foam system dosing, and park on charge with tanks vented. Keep a spare squeegee set and hose seals at the parking bay, since fill hardware decides uptime on a twin tank machine. Log square metres per fill per site to check whether driving speed or soil load is moving the figure.

Key points

• Twin 80L clean and dirty tanks on one ride on frame
• Rated up to 3,670 square metres per tank fill at 5km per hour
• Foam reduction system with extendable fill hose