Numatic CRL8055

Covering expansive industrial floors on foot limits the area an operator can clean in one shift. The compact CRL8055 ride-on scrubber features an 80L tank and 550mm scrub path, letting a seated operator clean at higher speeds with zero fatigue.

The CRL8055 suits sites moving up from walk behind scrubbing without jumping to full industrial ride ons. Drive steady 550mm lanes at 150rpm, overlapping slightly, with recovery keeping floors open behind the machine. Runtime runs 1 hour 40 on one battery or 3 hours 5 on two, so battery count follows shift length. On board charging removes the separate charger hunt at the end of the day, and Nu-Track telemetry reports usage back for fleet planning.

The 80L solution tank with a 550mm scrub width at 150rpm sets the coverage rhythm per fill. The NX1K lithium platform powers the compact ride on frame, with on board charging built in. Nu-Track telemetry adds the management layer, showing hours and location data that spreadsheets alone miss.

Train and authorise drivers, set speed limits for pedestrian areas, and walk the route for hazards before the first pass. Rinse tanks, wipe sensors, and leave the machine on charge with tanks vented. Review telemetry monthly to match battery counts and staffing to the floors that actually consume the hours.

Key points

• Ride on scrubbing with a 550mm path at 150rpm
• 80L solution tank with 1hr40 or 3hr5 runtime
• On board charging plus Nu-Track telemetry